Carefully pull out the print cartridge
horizontally, holding its center.
• Do not shake the removed print cartridge.
Doing so can cause remaining toner to
leak.
• Place the print cartridge on paper or
similar material to avoid dirtying your
workspace.
Lifting the guide plate, remove the
jammed paper carefully.
Slide the print cartridge in horizon-
tally. When the cartridge can go no
further, raise it slightly and push it
fully in. Then push down on the car-
tridge until it clicks into place.
Using both hands, carefully push up the front cover until it
closes.
•
If paper is jammed in tray 2 but is difficult to locate, pull out tray 2 to remove it. After removing
the paper, carefully push tray 2 all the way back inside the machine.
•
When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
CMF069
CMF070
CMF071
33