Advanced Scan Settings - Ricoh SP 3510SF Quick Manual

Using the Fax Function

Advanced Scan Settings

v Adjusting Image Density
You can adjust the image density for the current job.
1. Press the [Density] key.
2. Press the [ ][ ] keys to select the desired density level, and then press the [OK] key.
Normal
v Specifying Resolution
You can specify the scan resolution for the current job.
1. Press the [Image Quality] key.
2. Press the [ ][ ] keys to select the desired resolution, and then press the [OK] key.
Standard
for originals with
normal-sized characters
v Specifying the scanning side according to the original
(SP 3510SF)
If you are using the SP 3510SF model, you can specify the machine to scan both
sides of original automatically using the ARDF.
• If the machine is in Immediate Transmission mode, this function is not available. For details,
see "Sending a Fax", User Guide.
1. Press [Original].
2. Press the [ ][ ] keys to select the desired scanning method, and then press the [OK] key.
Select the sides of the original (1 side or 2-sides) to scan. When scanning 2-sides, select
the page and binding orientations according to the original.
• For more details about the fax function, see "Using the Fax Function",
• If you would like to change the default settings of the machine, see "Configuring the Machine
Using the Control Panel", User Guide.
Dark
Detail
for originals with
small print
Light
Photo
for originals with
images
User Guide.
25