Ricoh SP 3510SF Quick Manual page 10

Using the Copier Function
Initial Screen and Basic Operation
Press the [Start] key.
If you are using the SP 3510SF model,
depending on the machine's settings, "Set
Back Side" appears on the screen when
using the exposure glass.
• If you want to copy the back side of the
• If you want to end the job, press [
Turn over the original on the exposure glass, and then press
the [Start] key.
A 2-sided copy will be output, and "Set Front Side" appears on the
screen.
• If you want to copy the front side of the original again, turn over the
• If you want to end the job, press [
• To cancel photocopying, press the [Copy] key, press the [Clear/Stop] key, and then press
[Yes] for confirmation.
• You can change the paper tray for the current job by pressing the [
select to change the paper tray automatically according to the paper size (A4 or Letter).
• You can enable the machine to copy both sides of original with the exposure glass by
changing the machine's default setting. For details, see "Configuring the Machine Using
the Control Panel", User Guide.
• If a paper jam occurs, printing stops after the current page has been printed out. After the
jammed paper is removed, printing restarts from the jammed page automatically.
• If a scanning jam occurs in the ARDF or ADF, copying is canceled immediately. In this case,
copy the originals again starting from the jammed page.
• For information about originals, see "Getting Started",
• For information about removing jammed paper, see "Removing Paper Jams" on page 32.
10
original, proceed to the next step.
copy will be output.
original on the exposure glass, and then return to step 4.
before you press [
]. A
]. If a certain period of time passes
], the copying may finish automatically.
User Guide.
CMF141
][ ] keys. You can also