Sending The Fax - Ricoh SP 3510SF Quick Manual

Using the Fax Function
Initial Screen and Basic Operation for Sending a Fax
Press the [Start] key.
• Depending on the machine's settings, you
• Depending on the machine's settings,
If you have more originals to scan, press [Yes] within 60 sec-
onds, place the next original on the exposure glass, and then
press [OK]. Repeat this step until all originals are scanned.
If you do not press [Yes] within 60 seconds, the machine will start to dial
the destination.
When all originals have been scanned, press [No] to start

sending the fax.

• To cancel sending a fax, press the [Facsimile] key, and then press the [Clear/Stop] key.
• A fax number can contain 0 to 9, pause, "
• If necessary, insert a pause in a fax number. The machine pauses briefly before it dials the
digits following the pause.
• To use tone services on a pulse-dialing line, insert "
mode from pulse to tone temporarily.
• If paper is jammed in the ARDF or ADF, the jammed page has not been scanned properly.
When the machine is in Immediate Transmission mode, resend the fax starting from the jammed
page. When in Memory Transmission mode, scan the entire originals again.
• You can also specify destinations using the One Touch buttons, Speed Dial function, LDAP
server, or [Pause/Redial] key. In addition, you can broadcast a fax to multiple destinations. For
details, see "Using the Fax Function", User Guide.
• By default, the machine is set to print a transmission report automatically after a fax transmis-
sion. To change this setting, see "Configuring the Machine Using the Control Panel", User
Guide.
• For information about originals, see "Getting Started",
• For information about removing jammed paper, see "Removing Paper Jams" on page 32.
24
may be prompted to enter the fax number
again. In this case, re-enter the number
within 30 seconds, press [OK], and then
press the [Start] key. If the fax numbers
do not match, go back to step 3.
you may be prompted to place another
original on the exposure glass. In this
case, proceed to the next step.
", " ", and space.
" in a fax number. " " switches the dialing
User Guide.
CMF141