Avaya S8300 User Manual page 27

3 . In the Address (or Location) field of your browser, type the IP address or name of the Avaya
media server and press Enter.
- LAN access by IP address. If you are logging into the administrative interface over the
corporate local area network, you can type the media server's unique IP address in standard
dotted-decimal notation, such as http://192.152.254.201
- LAN access by server name. If the server has already been configured and if the corporate
LAN includes a domain name service (DNS) server that has been administered with the
servers' names, you can type the server's name into the address field instead of the IP address.
Server names vary depending on local administration (such as http://media-
server1.mycompany.com).
- Laptop access by IP address. If you are logging in to the services Ethernet interface from a
directly connected laptop, the IP address on the server is always 192.11.13.6. New
servers that have not yet been configured can only be accessed in this way. Server-name login
is not available through the services interface because this connection is a closed (private)
network with no DNS.
Note:
4 . If your browser does not have a valid security certificate, you will see a warning screen and
instructions to load the security certificate.
- If you are certain your connection is secure, accept the server security certificate to access the
Login screen.
- If you plan to use this computer and browser to access this or other Avaya media servers
again, click the main menu link to Install Avaya Root Certificate after you log in.
5 . The Login screen appears.
- In the Username field, type your user name (login ID), such as cust.
- Click the Login button or press Enter.
Note:
6 . Enter your login confirmation information as prompted:
- Password prompt. Type your password in the Password field, and click Login or press Enter
again.
- ASG challenge. If your login is Access Security Gateway (ASG) protected, you will see a
challenge screen. Enter the correct response and click Login or press Enter.
7 . The server will match your login information against its authentication tables. If the information
you entered is recognized as a valid login, the screen displays a two-frame window, with the main
menu in the left panel and a usage-agreement notice in the right window.
- If the main menu in the left panel has only about 10 links, you have accessed the server from
a login ID that has restricted permissions. You can adjust the login service levels using the
Login Administration screen in ASA or SAT.
Welcome to S8300 and G700
555-234-200 — Issue 1 — May 2002
The S8300 media server's name and IP address are specified during
initial media server configuration.
User names and passwords are case sensitive. Enter the login ID and
confirmation information in upper- or lowercase as required.
Access Procedures: Specific Access Procedures
21