Avaya S8300 User Manual page 30

Access Procedures: Specific Access Procedures
4 . The Network Connection Wizard appears. Click Next.
5 . In the Network Connection Type window, select the Dial-up to private network radio button
Click Next.
6 . Update the Phone Number to Dial window as follows:
- To make this a general-purpose connection, leave the phone number blank.
- To set up a connection for a specific location, enter the correct phone number for the media
server's modem. Insert digits such as 9 and 1 or *70, if necessary.
- Click Next.
7 . In the Connection Availability window, select "For all users" or "Only for myself" as needed.
Click Next.
8 . Update the Completing the Network Connection Wizard window as follows:
- Type a name for this dial-up connection. This name is used only by your computer to identify
this connection.
- Check the box to add the shortcut to your desktop if desired.
9 . Click Finish.
10 . If a Connect screen appears, click Cancel.
11 . Return to the Network and Dial-up Connections window.
12 . Right-click the entry you just created and select Properties.
13 . On the connection's Properties screen, click the Security tab.
- Select the Advanced (custom settings) radio button.
- Check the Show terminal window checkbox.
14 . Click the Networking tab.
- In the Components box, verify that Internet Protocol (TCP/IP) and Client for Microsoft
Networks are checked.
- Select Internet Protocol (TCP/IP) and click the Properties button.
15 . On the Internet Protocol (TCP/IP) Properties screen, click the Advanced button.
16 . On the Advanced TIP/IP Settings screen, clear the Use default gateway on remote
network checkbox.
If you leave this box checked, all your network traffic will be routed to the media server. Your
computer will act like it's been disconnected from the local network.
17 . Click OK three times to exit and save the changes.
18 . To access the remote server, see Using a dial-up networking connection.
24
Welcome to S8300 and G700
555-234-200 — Issue 1 — May 2002