Pal - Sony BVP-900 Series Product Information Manual

11
Specifications
BVP-900P (with OHB-750AP installed)
Input connectors
MIC in XLR-3-pin (Female) x 2, phantom +48 V, Line
Ref in BNC type(with an optional standalon kit, BKP-7910P)
DC in XLR-4-pin (Male, with an optional standalone kit,
BKP-7910P)
RET control 6-pin
Output Connectors
Test out BNC type, 1.0 Vp-p, 75 ohms
Prompter BNC type, 1.0 Vp-p, 75 ohms, input/output
Video out BNC type, 1.0 Vp-p, 75 ohms, (with an optional
standalone kit, BKP-7910P)
Viewfinder connector D-sub 25-pin
DC out (script) 4-pin, 5 W/12 VDC
Intercom XLR-5-pin (Female) x 2, input/output
AC utlity out Max. 200 VA
Input/output connectors
CCU Fischer type
Lens 36-pin
VTR 26-pin (with an optional standalone kit, BKP-7910P)
Tracker 10-pin
Remote1 8-pin (for RCP-700 series)
General
Msss (Approx.) 20 kg (44 lb 1 oz)
Dimensions (Approx.) 442 (L) x 381 (H) x 368 (W) mm
(17 1/2 x 15 x 14 1/2 inches)
Power consumption TBD
Operating temperature -20˚C to +45˚C (-4˚F to +113˚F)
Storage temperature -20˚C to +50˚C (-4˚F to +122˚F)
Supplied accessories
Angle adjustment fittings x2
Front cover x1
Number plate for up tally (x1), for side panel (x2), for rear panel (x1)
Belt for cable clamp x2
Operation manual x1
Maintenance manual x1
16:9/4:3 conversion board (supplied with OHB-750WSAP/730WSP)
Optional accessories
BVF-77CE, 7-inch monochrome viewfinder
BVF-7700P, 7-inch color viewfinder
VFH-770, 7-inch viewfinder sport hood
BKP-7911/7912, Script holder
BKP-7910P, Standalone kit
OHB-750AP/750WSAP/730P/730WSP, Integrated imaging capsule
Extension board
BKP-9901, System Manual
Recommended equipment
CCU-700AP, Camera control unit
MSU-700, Master setup unit
RCP-740/741/730/731/720/721/700/701, Remote control panel
VCS-700, Video selector
CNU-700/500, Camera command network unit
131
BVP-950P (with OHB-750AP installed)
Input connectors
MIC in XLR-3-pin (Female), phantom +48 V
Output connectors
Test out BNC type, 1.0 Vp-p, 75 ohms
Input/Output connectors
Viewfinder I/F 20-pin
Lens 12-pin
Camera adapter I/F 136-pin (68-pin x 2)
Remote 8-pin (for RCP-700 series and RM-B150)
OHB I/F 29-pin
General
Mass (Approx.) 3.7 kg (7 lb 5 oz) with BVF-10CE
Dimensions 302 (L) x 270 (H) x 127 (W) mm
(12 x 10 3/4 x 5 inches)
Operating tempertature -20˚C to +45˚C (-4˚F to +113˚F)
Storage temperature -20˚C to +50˚C (-4˚F to +122˚F)
Supplied accessories
Operation manual x1
Maintenance manual x1
16:9/4:3 coversion board (supplied with OHB-750WSAP/730WSP)
Optional accessories
CA-570P, Camera adaptor for CCU-700AP/550P
CA-550P/1, Camera adaptor for CCU-700AP/550P
CA-553, Camera adaptor for use with BVV-5PS/DNV-5
CA-530, Camera adaptor for SDI output
OHB-750AP/750WSAP/730P/730WSP, Integrated imaging capsule
VCT-14, Tripod adaptor
BVF-10CE/20WCE/C10W, Viewfinder
BKP-9901, System manual