Set-Up Menus - Sony BVP-900 Series Product Information Manual

8

SET-UP MENUS

In Sony DSP cameras, complicated setting up procedures are
virtually eliminated because all parameters are stored in memory as
digital values.
In typical system installations these parameters are adjusted using
the MSU or the RCPs. However, both the BVP-900/900P and BVP-
950/950P can be used in standalone applications and in these
situations control values can be changed using a series of viewfinder
menus. These menus are accessed by using the menu switches on
the camera head. The menu selection for the BVP-900/900P is by a
Photo 8-1 Rotary menu encoder on the front panel of the BVP-950/950P
47
combination of a rotary encoder and a toggle switch on the rear
control panel. For the BVP-950/950P, a convenient rotary encoder on
the front panel of the camera head is used for menu selection. Both
the BVP-900/900P and BVP-950/950P have User menus and
Engineering menus. When the menu system is initially accessed, the
Operation Menu pages are displayed. A special combination of the
menu controls allows access to the Top Menu which, in turn,
provides access to the other menus depending on whether or not
they have been selected by dip switches on the AT board.
Photo 8-2 Menu encoder on the rear control panel of the BVP-900/900P