Sony BVP-900 Series Product Information Manual page 125

Adjusting the Angle of the Viewfinder
1. Set the tilt lock lever to the friction position.
2. Adjust the friction by turning the knob.
Lock position
Friction position
Location and Function of Parts and Controls
3. Adjust the tilt. After setting the tilt position, set the tilt lock
lever to the lock position.
Loosen
Tilt knob
Adjusts the tilt friction.
UP TALLY switch
When this switch is set to ON, the UP TALLY
lamp lights in the same way as the R tally
lamp.
UP TALLY DIMMER control
Adjusts the brightness of the UP TALLY lamp.
Tilt lock lever
Tilt knob
40 degrees
40 degrees
10
124