(Q) Bvf-55/55Ce - Sony BVP-900 Series Product Information Manual

10
Location and Function of Parts and Controls

(q) BVF-55/55CE

Appearance
123
R TALLY lamp (red)
Lights when the red tally signal is input.
G TALLY lamp (green)
Lights when the green tally signal is input.
Up-tally lamp (red)
Set UP TALLY switch to ON. The lamp lights
in the same way as the R tally lamp.
The supplied number plate can be attached to
this.
Tilt lock lever
Fixes any tilting position.
12-pin connector
Connects to a video camera's VF connector,
using the supplied connecting cable.
Power and video/tally signals are supplied
through this connector.
Center marker V control
Adjusts the vertical position of the center
marker within ±5% of the screen size.
down
Center marker H control
Adjusts the holizontal position of the center
marker within ±5% of the screen size.
left
MARKER switch*
Setting this switch to ON displays the center
marker and safety zone indicatior (ON/OFF by
internal switch).
CONTRAST knob*
Adjusts the contrast of the viewfinder picture.
BRIGHT knob*
Adjusts the brightness of the viewfinder
picture.
PEAKING switch and knob*
Setting this switch to ON and turning the knob
corrects viewfinder image.
Used to adjust the focus on the video camera.
*These controls do not affect the output signal of the video camera.
up
V
right
H