Tg5 Roller Assy And Gl Gear (T) - Sony HVR-Z1J Service Manual

2-3-26. TG5 Roller Assy and GL Gear (T)

1. Removal procedure
1) Rotate the TG5 roller assy 1 in the direction of the arrow and
remove the TG5 roller assy 1 and the TG5 spring 2 from the
coaster (T) assy.
2) Release the claw (A) and remove the GL gear (T) 3 and the
torsion coil spring (GLT) 4 from the coaster (T) assy.
4 Torsion
spring (GLT)
3 GL gear (T)
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
1 TG5 roller assy
2 TG5 spring
Coaster (T) shaft
Coaster (T) assy
A Claw
6-100
2. Attachment procedure
1) Install the GL gear (T) 3 and the torsion coil spring (GLT) 4
into the coaster (T) assy.
2) Install the TG5 spring 2 into the coaster (T) assy.
3) Install the TG5 roller assy 1 into the coaster (T) assy by rotating
it in the direction opposite to the arrow.
Points to be noted
Flange portion of
T5 roller assy
COASTER (T) ASSY, GL GEAR (T),
TORSION SPRING (GLT)
Key Points in Re-assembling
Coaster (T) assy
Torsion spring (GLT)
GL gear (T)
Install the TG5 roller assy
in such a manner that the
end of the TG5 spring be
higher than the flange portion
of the TG5 roller assy.
(Fig. 1)