2-3-15. TG7
1. Removal procedure
1)
Remove the TG7 nut 1 by turning it in the direction of the
arrow.
2)
Remove the TG7 2 and compression coil spring 3 from the
TG7 arm block assy.
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
2. Attachment procedure
1)
Install the compression coil spring 3 and TG7 2 in the TG7
shaft of the TG7 arm block assy.
2)
Install the TG7 nut 1 by turning it in the opposite direction of
the arrow.
1 TG7 nut
2 TG7
3 Compression spring (TG7)
TG7 shaft
TG7 arm assy
6-88