Ule Brake Assy - Sony HVR-Z1J Service Manual

2-3-12. ULE Brake Assy

1. Removal procedure
1) Remove the tension spring (ULE brake) 1 from the ULE brake
assy 2.
2) Slide the LS chassis block assy slightly in the direction of the
arrow F.
3) Slant the ULE brake assy 2 in the direction of the arrow A
and remove it by sliding it in the direction of B.
LS chassis block assy
1 Extension spring
(ULE brake)
ULE brake assy
2 ULE brake assy
B
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
2. Attachment procedure
1) Confirm the front side and the rear side of the ULE brake assy
2. Hold it correctly with tweezers. Insert the portion C into
the hole D of the LS chassis block assy and install the center
hole in the E of the chassis.
2) Install the tension spring (ULE brake assy) 1.
LS chassis block assy
ULE brake assy
ULE BRAKE ASSY
Key Points in Re-assembling
ULE brake assy
6-85
F
A
E
Hole D
C