Gear With Motor (Lens Cover) (M904); Flexible Board; Lens Shutter, Lens Ornamental Plate - Sony DCR-IP1 Service Manual

DCR-IP1/IP1E
2-3. GEAR WITH MOTOR (LENS COVER) (M904), FP-731 FLEXIBLE BOARD
Shutter lever concave portion
9 FP-731 flexible board

2-4. LENS SHUTTER, LENS ORNAMENTAL PLATE

Note: When mounting the geared motor,
meet a convex portion of the gear with a
concave portion of the shutter lever.
Gear convex portion
3 Connector
(CN7311)
7 Lens ornamental plate
4 Shutter lever
4 Two solders
7 Screw
(M1.7X3.5)
6 Gear with motor (Lens cover)
(M904)
8 Two screws (M1.7X3.5)
6 Two screws (M1.7 3.5)
X
5 Lens shutter
3 Shutter retainer
2 Screw (M1.7 3.5)
X
2-6
5 FP-769 flexible board
1 Draw out the FP-769 flexible board
in a direction of the arrow.
At this time, take care not to damage
the flexible board.
2 Two screws (M1.7X3.5)
1 Screw (M1.7 3.5)
X