Mechanical Block Check, Adjustment And Replacement; Hc Roller Assembly; Guide Guard Assembly - Sony CCD-F35 Service Manual

3. MECHANICAL BLOCK CHECK,
ADJUSTMENT AND REPLACEMENT
Notes: © Use the mode selector (Ref. No. J-10) for pro-
cedures in this chapter.
© Modes within a frame[__ are those set by pressing
the buttons of the mode selector.
3-1. HC ROLLER ASSEMBLY
1. Removal (See Fig. 3-1.)
1) Remove the screw @, then remove the HC roller assembly
e.
2. Installation (See Fig. 3-1.)
2) ° Secure the HC roller assembly @ with the screw @ .
Fig. 3-1.
3-2, GUIDE GUARD ASSEMBLY
1. Removal (See Fig. 3-2.)
Remove the screw @, then remove the guide guard assembly @.
2. Installation (See Fig. 3-2.)
@ Screw (P2 x 3)