F Page Table (Ntsc (60I) & Pal (50I) Modes) - Sony HVR-Z1J Service Manual

Ver. 1.7 2007. 10
8. 1F Page Table (NTSC (60i) & PAL (50i) modes)
Note1: When reading or writing the 1F page data, select page: 0, address:
10, and set data: 01, then select F page. The 1F page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
"00".
Note2: Fixed data-1: Initialized data. (Refer to "1. Initializing the E, F,
14, 19, 1E, 1F Page Data".)
Fixed data-2: Modified data. (Refer to "2. Modification of E, F,
14, 19, 1E, 1F Page Data").
Note3: Perform this item in NTSC (60i) mode or PAL (50i) mode only
required.
Address
00 to 0D Fixed data-1
0E Fixed data-2
0F to 10 Fixed data-1
11 Fixed data-2
12
13 to 15 Fixed data-1
16 Fixed data-2
17 to 4D Fixed data-1
4E Fixed data-2
4F to 50 Fixed data-1
51 Fixed data-2
52 (Modified data. Copy the data
53 built in the same model.)
54
55 to D5 Fixed data-1
D6 Fixed data-2
D7
D8 to E1 Fixed data-1
E2 Fixed data-2
E3
E4 to FF Fixed data-1
HVR-Z1J/Z1U/Z1N/Z1E/Z1P/Z1C
Remark
Table. 6-1-18.
6-22