Understanding The Printer Front Panel - Intermec EasyCoder 3240 Getting Started Manual

NugFont
HelvC Courier

Understanding the Printer Front Panel

The front of the 3240 printer contains one button (Feed/Pause) and three light
emitting diodes (LEDs) that the printer uses to provide information during
printer operation. The three LED indicators operate as follows:
Green LED
Orange LED
Yellow LED
The Feed/Pause button performs the following functions depending on the
mode of the printer:
Print Mode
If the printer is idle:
If the printer is printing:
When the printer is first
powered on:
C o d e 39
Preparing the Printer for Connection
LED
Power
Power
Alert
Alert
Empty/Pause
Empty/Pause
Feed/Pause
3240G.002
Function
Press and release the Feed/Pause button to feed out one label
or a minimum specified amount of media.
Press and hold the Feed/Pause button to continuously feed
media until you release the button.
Press the Feed/Pause button twice to take the printer offline.
Press and release the Feed/Pause button to make the printer
pause.
Press and release the Feed/Pause button again for the printer
to resume printing.
Press and hold the Feed/Pause button to cancel the print job.
Press and hold the Feed/Pause button to print the hardware
configuration label. Refer to "Testing Printer Operation" later
in this chapter.
1
State Indicates
Off Power off
On Power on
Off Printing or idle
Flashing Over-temperature
On System fault
Off Printing or idle
Flashing Printer is paused
On Media fault
1-5