Understanding The Printer Sounds; Using The Batteries - Intermec PW50 User Manual

Understanding the Printer Sounds

Using the Batteries

PW50 Workboard Printer User's Guide
The PW50 plays sounds in response to several actions that you can
take with the printer. Use the following table to understand when the
sounds occur and what they mean.
Understanding the Printer Sounds
Sound Occurs When:
•
Power You insert a battery in the printer.
•
The PW50 starts charging the battery.
•
You plug in the AC adapter.
Hardware You open the media door, close the media door, or insert a cable.
Button You press one of the PW50 buttons.
•
Error The printer cannot feed paper or print a job because of a
hardware issue such as the media door open, a paper jam, or
there is no media.
•
An error occurs such as a paper jam, a print error, or the
printer is out of range.
The PW50 uses a rechargeable 2200 mAh lithium-ion battery (Model
AB13) for power. You must fully charge the battery before you can use
the PW50. A fully charged battery can last up to one week without
needing to be recharged when the printer is in Standby mode.
Use Intermec Model AB13 battery only. Use of another battery
may present a risk of fire or explosion.
The Model AB13 battery may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 100°C
(212°F), or incinerate.
Dispose of used batteries promptly. Keep away from children.
Chapter 1 — Using the PW50 Workboard Printer
5