Setting The Media Sensitivity Number For Intermec Media And Ribbon - Intermec EasyCoder 3240 Getting Started Manual

Setting the Media Sensitivity Number for Intermec Media
and Ribbon
The sensitivity number on each roll of thermal transfer media or ribbon has an
asterisk (*) in place of one of the digits. To optimize the sensitivity number for
thermal transfer media, you combine the digits as in this example.
Media or Ribbon Sensitivity Rating
Thermal Transfer 56*
Media
Thermal Transfer 5*7
Ribbon
567
To set the sensitivity rating for direct thermal media, use the three-digit
sensitivity rating located on the roll of media or listed in the Direct Thermal
Media Sensitivity Settings table on the following page.
To change the media sensitivity number with PrintSet
1. Start the PrintSet applications.
2. Click the Paper type button:
3. In the Print Quality Setup dialog box, enter your three-digit number in the
Media Sensitivity Number field.
4. Click OK.
Co de 39 Co de 39
Optimizing Print Quality
Description
The asterisk reserves the third digit to
identify the ribbon's sensitivity
number.
The asterisk reserves the second digit
to identify the media's sensitivity
number.
Optimum Sensitivity Rating
3
3-17