Setting The Media Sensitivity Number For Other Media And Ribbon - Intermec EasyCoder 3240 Getting Started Manual

EasyCoder 3240 Printer Getting Started Guide
Direct Thermal Media Sensitivity Settings
Approximate Sensitivity Ratings
700 Series High Sensitivity
400 Series Medium Sensitivity
100 Series Low Sensitivity
3-18
Setting the Media Sensitivity Number for Other Media and
Ribbon
If you are not using Intermec media and ribbon, or you misplaced your
packaging with the three-digit sensitivity number label on it, you can set the
approximate sensitivity setting. The approximate sensitivity numbers are the
first entry (in bold text) for each series in the media sensitivity settings tables on
the next two pages. Enter the three-digit approximate sensitivity setting (for
example, 800) to achieve acceptable print quality.
If you are unsure of what media sensitivity number to set, start with the highest
setting that provides the lowest amount of energy (800 for thermal transfer and
700 for direct thermal), and work your way down until you achieve the best
print quality.
Use the following tables to find the correct sensitivity rating for your direct
thermal media or thermal transfer media and ribbon combination.
Sensitivity
Setting
720
480
460
450
440
420
170
170
160
140
130
Co de 39 Co de 39
Direct Thermal Media
Duratherm Lightning Plus
Duratherm Lightning IR-2
European IR
Duratherm Lightning-1
European Thermal
Duratherm Lightning-2
European Tag
European Reinforced
Duratherm II Tag
European Top
Duratherm II