Restore Default - Sagem F@st 2604 Reference Manual

5 - Information / Configuration
5.11.1.3

Restore Default

Object: This menu is used to return to factory configuration.
The existing configuration is completely overwritten.
•
Select the Restore Default
display the following screen:
•
click on the Restore Default Settings button and the following screen appears:
•
Click on the OK button if you really want to return to the factory configuration.
A few moments after, the screen of the "Internet Connection" menu appears. Refer to paragraph
5.6.
All the LEDs go off except for the green "
activated); the green "
returning to the factory configuration starts. It lasts for around 2 minutes.
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-134 Sagem Communications document. Reproduction and disclosure prohibited
sub menu in the Settings
" LED (WLAN) (if the wired network is
" LED (PWR) then all the LEDs and the process for
menu of the Management section to