Connectors - Sagem F@st 2604 Reference Manual

2.1.1

Connectors

Marking
ADSL
ETH1 to ETH4
REG
PWR
Sagem Communications document. Reproduction and disclosure prohibited
2 - Description and connection of your router
RJ11 connector - 6 pts. This connector is identified by a grey line on the
TM
base (SAGEM F@st
It is used for the connection to an ADSL line (WAN interface).
RJ45 connectors - 8 pts (10/100BASE-T Ethernet Interface). These
connectors are identified by a yellow line on the base.
They are used to connect to a computer or a television set (via a TV/Video
Decoder).
This button allows the router to be reset to the factory configuration
(see § A.7).
Note: It is reset relative to the other elements to prevent an accidental
loss of configuration.
On/Off switch.
Miniature jack fixed connector.
This connector enables the router to be supplied with direct current from a
mains adapter unit.
SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A
Meaning
2604/2644).
Page 2-3