Advanced Wireless - Sagem F@st 2604 Reference Manual

5 - Information / Configuration
You may automatically generate encryption keys or manually enter the keys.
The "Key phrase" can consist of up to 15 alphanumeric characters.
To manually configure the encryption key, enter five hexadecimal pairs of digits for
each 64-bit key, or enter 13 pairs for the single 128-bit key (A hexadecimal digit is
a number or letter in the range 0-9 or A-F). Note that the WEP key protects data
transmitted between wireless nodes, but does not protect any transmissions over
your wired network (LAN) or over Internet (WAN) using Internet Explorer 5.0 or
above.
WPA-PSK
See subsection 5.7.2.1 - WPA-PSK
WPA2-PSK
See subsection 5.7.2.1 - WPA2-PSK
Other
See subsection 5.7.2.1.

Advanced Wireless

Field
Enable advanced
Wireless Configuration
Enable Guest SSID
Guest SSID
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-14 Sagem Communications document. Reproduction and disclosure prohibited
Check the appropriate box to be able to display the
Security, MAC Filter, Advanced and
Quality of Service menus in the "Wireless" section.
Note: If you check this box, the "Enable Guest SSID"
and "Guest SSID" fields appear.
Check the appropriate box to activate the "Guest SSID". Box not
Enter a name for the "Guest SSID".
Meaning Default
Box not
checked
checked
Guest