Table of Contents
Advertisement
Annexe E - Configuration par défaut
This
SAGEM F@st
These default parameters can be modified by a particular preconfiguration of your
SAGEM F@st
E.1
Default username and password
Username
Password
The
Username
Provider).
E.2
Default configuration for the local network(LAN)
The following table gives the values of the principal LAN parameters of your SAGEM F@st
2604/2644
(ETH1
LAN characteristics
ETH1
IP address (
ETH2
IP address (
ETH3
IP address (
ETH4
IP address (
BROADCAST, ARP, MULTICAST
Router
NAT/PAT
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page E-2
Sagem Communications document. Reproduction and disclosure prohibited
section
indicates
the
TM
2604/2644 when it leaves the factory.
TM
2604/2644.
admin
admin
and
Password
to ETH4) :
192.168.1.1/24
)
)
)
)
values
of
the
default
can be different according to the ISP (Internet Service
Value
Internet and HTTP configurator access (bridged)
_
Activated
_
The LAN traffic is routed to your ISP
_
Activated
parameters
of
your
TM
State
- Quick Links:
- Configuration of Network Parameters
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
