Wireless - Basic - Sagem F@st 2604 Reference Manual

5.7.1.1

Wireless - Basic

Field
Enable Wireless
Hide Access Point
SSID
Country
BSSID
Channel
Sagem Communications document. Reproduction and disclosure prohibited
Action/Meaning
Check the appropriate box to activate the wireless
network (Wi-Fi).
Note: The steady "Wi-Fi" LED on the front of the
router shows that the wireless network (Wi-Fi)
is activated.
Check the appropriate box to mask the broadcast of the
SSID and prevent any Wi-Fi connection on your router.
Note: When this box is checked, the router's SSID is
absent from the Wi-Fi adaptor user's own list of
monitored sites (Access Point).
Enter your router's SSID.
Note: This is indicated on the label stuck to the box.
Select the country of your choice from the scroll down
list.
This is the MAC address of the router's Wi-Fi interface
(Access Point). In the "Structure" mode, this address
identifies a cell (BSS in English Basic Service Set).
This cell is a set formed by the access point and the
stations located in its coverage area.
Non modifiable
This is the radio channel used by the router and
its Wi-Fi clients to communicate with each other. This
channel must be the same for the router and all its
Wi-Fi clients.
Select the channel you want from the scroll down list
(auto, channels 1 to 13).
Note: Channel 11 corresponds to frequency
2462 MHz.
Note: If you select "Auto", the Wi-Fi equipment will
select the access point channel (router) which
will emit the strongest signal.
You will find an identical "Channel" field in the
"Advanced" menu of this same section. Any
modifications are carried over from one field to
another.
Conform to the CE Declaration of conformity / Radio
rules list in appendix B to paragraph B.2.
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
5 - Information / Configuration
Default:
Box
checked
Box not
checked
Sagem
FRANCE
_
Auto
Page 5-11