Connecting The Ethernet Interface Of Your Router To Your Tv Decoder - Sagem F@st 2604 Reference Manual

2 - Description and connection of router
2.3.4 Connecting the Ethernet interface of your router to
your TV decoder
Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the
Ethernet fixed connector (marked ETH1, ETH2,
Connect the other end of the cable to a TV decoder.
Note: For connection to the decoder, refer to the manufacturer's documentation.
SAGEM F@st™ 2604/2444 Reference Manual - 253080888-A
Page 2-10 Sagem Communications document. Reproduction and disclosure prohibited
ETH3 or ETH4) of your router.