Quality Of Service - Sagem F@st 2604 Reference Manual

5.9.4

Quality of Service

It is essential to check the box "Enable Quality Of Service" in the "WAN" menu of
the section "Advanced Setup" so that menu "Quality of Service" is diplayed.
This menu contains 2 sub-menus:
•
Queue Config (see subsection 5.9.4.1),
•
QoS Classification (see subsection 5.9.4.2).
Subject: This menu is used to allocated different types of traffic queues with different priorities
in order to improve the traffic flow. To do this, the quality of service (QoS) provides
the following three services: Classification (set-1, set-2), Marking (TOS, DSCP) and
queues (Queuing).
The quality of service is only significant if all the traffic (data, video) is greater than the
up rate of the ADSL line.
•
Select the Quality of Service
screen:
Sagem Communications document. Reproduction and disclosure prohibited
5 - Information / Configuration
menu in the Advanced Setup
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
section to display the following
Page 5-89