Installation By Ethernet Interface - Sagem F@st 1201 Quick Installation Manual

SAGEM F@st™ 1201
Installation on the Ethernet port
You selected «Use the Ethernet cable»,
click on Next.
Follow the instructions provided by the
installer screens by pluging in the
modem supply, switching it on and
connecting the ADSL line and then
connect the modem/router to your
computer using the Ethernet cable.
Once you have made these connections,
an Internet connection screen appears.
You must enter your connection ID then
your connection password.
This information is provided by your Internet Service Provider (ISP).
Once you have entered the configuration
parameters, a window appears listing the
different steps in the installation. Once all
these steps are complete, an end of the
installation window appears telling you
that your modem/router has been
correctly installed.
You may now use your Internet access.
Installation from the CD-ROM 6