FUTABA 4PK-2.4G SuperR Instruction Manual page 50

Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Steering (EPA) adjustment
(Preparation)
- Before setup of the steering end point adjustment (EPA), set
the steering D/R dial (initial setup: DL1) to the maximum steer-
ing angle position 100%.
- Select the setting item "ST-LFT" by (JOG) button up or down
operation and make the following adjustments:
1
Steering (left side) adjustment
Turn the steering wheel fully to the left and use
the (+) or (-) buttons to adjust the steering angle.
2
Steering (right side) adjustment
Turn the steering wheel fully to the right and use
the (+) or (-) buttons to adjust the steering angle.
3
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button once).
When EPA TRIM is set to ACT at system setting (p.122) steering end point adjustment (EPA) can be performed
by steering trim set digital trim or dial. (Steering trim initial setup DT1).
Steering left side adjustment
With the steering wheel turned fully
to the left, steering is adjusted by
steering trim. Temporarily displayed
at this part of the initial screen as
shown in the figure below.
50
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
Quick EPA
DT-1
End Point Adjuster "EPA"
Setting item (channel and direction)
ST-LFT :Steering (left side)
ST-RGT :Steering (right side)
TH-FWD :Throttle (foward side)
TH-BRK :Throttle (brake side)
3C-UP :3rd channel (up side)
3C-DWN :3rd channel (down side)
4C-UP :4th channel (up side)
4C-DWN :4th channel (down side)
Setting item selection
(channel and direction)
- Select by (JOG) button left or right
operation.
- The direction (ST-LFT and ST-RGT)
linked with the steering wheel is
switched.
- The direction (TH-FWD and TH-
BRK) linked with the throttle trigger
is switched.
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
Note
Step #1 & #2 are done when
the receiver is in the on posi-
tion installed on the chassis.
You're watching the wheel
reach their maximum end point.
Steering EPA
ST-LFT :0~120
ST-RGT :0~120
Initial value :100
Steering right side adjustment
With the steering wheel turned fully
to the right, steering is adjusted by
steering trim. Temporarily displayed
at this part of the initial screen as
shown in the figure below.
100%