Data Transfer "Dttrn - FUTABA 4PK-2.4G SuperR Instruction Manual

Data Transfer "DTTRN"

This function copies the model memory data of one T4PKSR to another T4PKSR. Data
exchange with a T4PK Super is also possible, but functions not provided at the T4PK Su-
per are not copied. Connect the communication port of both T4PKSR with the optional
DSC cord. Use with this function with the T4PKSR power switch at the display side.
Data is not interchangeable with T4PK.
Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direc t c all but ton
is set, the setup screen is also
called by the following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Using the Data Transfer function
(Preparation)
- Connect the communication port of both transmitter with the
optional DSC cord.
1
Set the power switch of both transmitter to the display (DISP
ON) side.
Use the (JOG) button and (+) button to display the "DT-TRN"
at both transmitter.
126
Cover
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
Communication port (interior
left side)
DSC cord for T4PKSR (option)
Connect the communication
port of both T4PKSR with
the optional DSC cord.
•Select the setting item by
•Select the setting item by
button
* blinks at the current setup item.
* b l i n k s a t t h e c u r r e n t
setup item.
Data Transfer "DTTRN"
button
Data transfer side
Transmitter type
(Data receive side)
Data receive side
When the "DT-TRN" menu
is selected when the trans-
mitter power switch is at
the transmit (PWR ON)
side, the message shown
below prompting you to set
the switch to the display
side is displayed.