For Your Safety As Well As That Of Others; Explanation Of Symbols; 2.4Ghz System Precautions; High Speed Mode Precautions - FUTABA 4PK-2.4G SuperR Instruction Manual

Use this product in a safe manner. Please observe the following safety precautions at all
times.
The parts of this manual indicated by the following symbols are extremely important
and must be observed.
Symbols
 Danger
 Warning
Caution

Symbols:
 Warning
 Special attention should be paid before turning on the system while other cars are running or
other airplanes are flying because the 2.4GHz RC system could potentially affect them.
 Be sure to set the Fail Safe function.
Caution

 When using the T4PKSR in the high speed (HIGH SPEED) mode, always use it under the follow-
ing conditions:
Servos
Receiver's battery :Matched to the ratings of the receiver and connected digital servo (dry cell battery cannot be used).
Transmitter mode :HIGH SPEED mode (See p.46 for setting method.)
Under other conditions, the set will not operate, or the specified performance will not be displayed even if it operates.
In addition, it may cause servo trouble. Futaba will not be responsible for damage, etc. caused by combination with the
products of other companies.
In addition, the FSU Fail Safe Unit cannot be used because the system is different. Use the fail safe function of the trans-
mitter.
 When using analog servos, always switch the T4PKSR servo response to the NORMAL mode.
Transmitter mode :NORMAL mode (See p.46 for setting method.)
Receiver's battery :Matched to the ratings of the receiver and connected servo.
The set cannot operate in the HIGH SPEED mode. Operation in this mode will cause trouble with the servo and other equip-
ment.
Digital servos (including BLS Series brushless servos) can also be used in the NORMAL mode.
8

For Your Safety As Well As That Of Others

Explanation of Symbols

Indicates a procedure which could lead to a dangerous situation and may
cause death or serious injury if ignored and not performed properly.
Indicates procedures which may lead to dangerous situations and could
cause death or serious injury as well as superficial injury and physical
damage.
Indicates procedures that may not cause serious injury, but could lead to
physical damage.
 : Prohibited

2.4GHz System Precautions

High Speed Mode Precautions

:Futaba digital servo (including BLS Series brushless servos)
Explanation
 : Mandatory