Removing The Fuel Supply Pump - APRILIA RSV 1000 R FACTORY Workshop Manual

RSV 1000 R - RSV 1000 R FACTORY
3.2.4.

REMOVING THE FUEL SUPPLY PUMP

•
Remove the whole fuel supply pump unit.
NOTE Have the appropriate special tool OPT at hand:
- Aprilia part# 0277295 (hose clamp installation pliers).
CAUTION
Upon installation, replace the hose clamp that
has been removed with a new one having the
same dimensions.
Do not attempt to reinstall the removed hose
clamp, since it is unusable.
Do not replace the removed hose clamp with a
screw clamp or with other types of clamp.
• Release the hose clamp (1).
• Pull the fuel pipe off the pump.
•
Disconnect the electric connector.
• Disconnect the electric connector.
FUEL SYSTEM
3 - 15