Removing The Front Brake Discs - APRILIA RSV 1000 R FACTORY Workshop Manual

RSV 1000 R - RSV 1000 R FACTORY
5.8.4.

REMOVING THE FRONT BRAKE DISCS

•
Remove the front wheel.
NOTE The following procedure refers to a single disc,
though it is applicable to both.
To remove the screws (1), it is advisable to use an impact
driver, thanks to which it will be possible to detach the
screws from the LOCTITE
•
Loosen and remove the six brake disc screws (1).
CAUTION
When reassembling, apply LOCTITE
the thread of the brake disc screws (1).
NOTE When reassembling, insert all the screws (1) by hand
and tighten them in a crisscross pattern in the following or-
der: A-B-C-D-E-F.
• Remove the brake disc (2).
®
243.
®
243 on
CYCLE PARTS
5 - 127