APRILIA RSV 1000 R FACTORY Workshop Manual page 61

RSV 1000 R - RSV 1000 R FACTORY
SETTING THE DIGITAL CLOCK
The digital clock is at the top of the display.
The clock displays only when the ignition key is turned to
" ".
IMPORTANT The clock can be set only with the vehicle sta-
tionary and the ignition key turned to " ".
HOURS SETTING
• Hold down the + and – keys for at least 3 seconds so
that the hour digits start to flash.
• Use the + and – keys to set the hour.
• If one of the keys is held down, the setting will run
through the hours one a second.
•
Hold down the TRIP/V key for at least 3 seconds to
confirm the new setting. The clock will automatically
move to the minutes setting mode.
MINUTES SETTING
•
Press the + or – key to increase/decrease the minute
setting. If one of the keys is held down, the setting runs
through the minutes one a second.
•
Hold down the TRIP/V key for at least 3 seconds, at
which point the minute digits will stop flashing to indi-
cate that the new setting is confirmed.
•
The clock setting is lost when the battery is discon-
nected from the vehicle.
CHRONOMETER
The chronometer measures the lap time when driving on
track and stores the data for later reference.
When the chronometer is enabled, the clock function is ex-
cluded.
To activate the chronometer :
•
Hold down the LAP button and press TRIP/V for more
than 3 seconds. The clock display will be replaced by
"01 LAP 00'00"00 ".
To de-activate the chronometer :
•
Hold down the LAP button and press TRIP/V for more
than 3 seconds. The clock display will return.
GENERAL TECHNICAL INFORMATION
2 - 29