CYCLE PARTS
5.2.11.
TOPPING UP THE FORK FLUID (RSV FACT)
NOTE Make sure to have the special tools A (no.8140424)
and B (no.8140149) ready at hand before proceeding.
•
Keep the stanchion and slider assembly upright and fit
the two shells of the special tool (B).
•
Raise the washer and the damping cylinder assembly.
•
Fill the fork with the specified fluid, up to correct level.
Use a dipstick to determine correct level.
3
Oil quantity: 30.51 in
(500 cm
Oil level: 3.35 in (85 mm) (from slider rim).
•
Accurate oil level's measurement is only ensured when
the slider is perfectly vertical and fully down. Oil level
must be the same in both fork legs.
5 - 58
3
)
RSV 1000 R - RSV 1000 R FACTORY