Table of Contents
Advertisement
13.2 Replacing the control panel
Take the control panel from the boiler frame.
Install the control panel in the boiler door by following the
above procedure in reverse order.
13.3 BC10 Display readings
Display
Key to display reading
reading
[\7\5|
Current space heating water temperature
[p/2\2|
Current system pressure
Table 17 BC10 Display readings
13.4 BC10 Display settings
Display
Meaning of display setting
setting
Sea level (0-4,000 ft):
configured target load (GB162-80 kW)
High altitude (4,000-10,000 ft) :
configured target load (GB162-80 kW)
[l/9/9|
Sea level (0-4,000 ft):
configured target load (GB162-100 kW)
High altitude (4,000-10,000 ft):
configured target load (GB162-100 kW)
Configured target value of the pump
run-over time.
[f/\/5|
NOTE: Do not set the pump run-over
time to less than [f/\/5| (= 5 minutes).
DHW flow operating condition setting.
NOTE: If the setting [c/\/0| is displayed,
[c/\/1|
the frost protection of the DHW flow has
also been switched off.
Table 18 BC10 Display settings
Logamax plus GB162-80 kW/100 kW - Subject to modifications resulting from technical improvements!
Display readings
Unit
Range
[\/\/0|
°F
[p/0.0|
psi
Display settings
Unit
[l/2/5|
[l/9/9|
%
–
[l/3/6|
[l/9/9|
%
–
[l/2/0|
[l/9/9|
%
–
[l/3/0|
[l/9/9|
%
–
[f/0/0|
[f/6/0|
min.
–
[c/\/0|
–
Display information
Remarks
[1/9/0|
–
[p/5/8|
–
Range
[l/??/|
/
100 %
[l/??/|
/
100 %
[l/??/|
/
100 %
[l/??/|
/
100 %
[f/1/d|
/
24 h
[c/\/1|
"Off"
/
"On"
13
Factory-
adjusted
setting
[l/??/|
[l/??/|
[l/??/|
[l/??/|
[f/\/5|
[c/\/1|
73
Hide quick links:
Advertisement
Table of Contents
