N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
2.
Select Advanced > Advanced Setup > Wireless Repeating Function to display the
Wireless Repeating Function screen.
3.
In the Wireless Repeating Function screen (depending on the frequency you want to use),
select the Enable Wireless Repeating Function check box and select the Wireless Base
Station radio button.
4.
Enter the MAC address for one or more repeater units.
5.
Click Apply to save your changes.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the
wireless connection to the base station.
Note:
If you are using the DGND3700v2 base station with a
non-NETGEAR wireless modem router as the repeater, you might
need to change additional configuration settings. In particular, you
should disable the DHCP server function on the wireless
repeater AP.
To configure the wireless modem router as a repeater unit:
1.
Log in to the wireless modem router that will be the repeater. Select Basic > Wireless
Settings and verify that the wireless settings match the base unit exactly. The wireless
security option has to be set to WEP or None.
2.
Select Advanced > Advanced Setup > Wireless Repeating Function, and select the
Enable Wireless Repeating Function check box and the Wireless Repeater radio button.
Advanced Settings
99
Scroll to view
more settings