Set Up A Repeater Unit - NETGEAR WNDR4500v2 User Manual

Select Advanced > Advanced Setup > Wireless Repeating Function to display the
2.
Wireless Repeating Function screen.
In the Wireless Repeating Function screen (depending on the frequency you want to use),
3.
select the Enable Wireless Repeating Function check box and select the Wireless Base
Station radio button.
Enter the MAC address for one or more repeater units.
4.
Click Apply to save your changes.
5.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
If you are using the base station with a non-NETGEAR router as the
Note:
repeater, you might need to change more configuration settings. In
particular, you should disable the DHCP server function on the
wireless repeater AP.

To configure the router as a repeater unit:
Log in to the router that will be the repeater. Select Basic > Wireless Settings and
1.
verify that the wireless settings match the base unit exactly. The wireless security option
has to be set to WEP or None.
Select Advanced > Wireless Repeating Function, and select the Enable Wireless
2.
Repeating Function check box and the Wireless Repeater radio button.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Advanced Settings
92
Scroll to
view more
settings