Set Up A Repeater Unit; Port Forwarding And Triggering - NETGEAR JNR1010 User Manual

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
If you are using the JNR1010 base station with a non- router as the
Note:
repeater, you might need to change additional configuration settings.
In particular, you should disable the DHCP server function on the
wireless repeater AP.

To configure the router as a repeater unit:
Log in to the router that will be the repeater.
1.
Select Basic > Wireless Settings and verify that the wireless settings match the base unit
2.
exactly.
The wireless security option must be set to WEP or None.
Select Advanced > Wireless Repeating Function and select the Enable Wireless
3.
Repeating Function check box and the Wireless Repeater radio button.
Complete the Repeater IP Address field.
4.
This IP address must be in the same subnet as the base station, but different from the
LAN IP address of the base station.
Click Apply to save your changes.
5.
Verify connectivity across the LANs.
6.
A computer on any wireless or wired LAN segment of the router should be able to
connect to the Internet or share files and printers with any other wireless or wired
computer or server connected to the other access point.

Port Forwarding and Triggering

By default, the router blocks inbound traffic from the Internet to your computers except replies
to your outbound traffic. You might need to create exceptions to this rule for these purposes:
To allow remote computers on the Internet to access a server on your local network.
•
To allow certain applications and games to work correctly when your router does not
•
recognize their replies.
Your router provides two features for creating these exceptions: port forwarding and port
triggering. The next sections provide background information to help you understand how
port forwarding and port triggering work, and the differences between the two.
N150 4-Port Wireless Router JNR1010
Advanced Settings
68