Owner's Manual
4.7
Master Section
4.7.1 Aux Inputs A and B
Aux Input Select Button
Aux Input Level Control
4.7.2 Talkback System
The StudioLive features an internal effects processor that allows you to
load two different effects at the same time. You also can patch processed
return signals from an external effects processor using Aux Inputs A and B.
Section 8.5 goes into the connections and procedures in greater detail.
Enables Fat Channel Viewing.
As previously described in section 4.1.1, the Select button routes its channel
through the Fat Channel, allowing you to add dynamics processing, EQ, and
panning, as well as enable output assignments.
Controls the Signal Level of the Aux Input.
This knob controls the overall volume of the of the Aux Input signal.
The StudioLive features a Talkback microphone input on the back panel. This can
be routed to the aux outputs and to the mains. It is important to note that the
aux outputs are grouped in this section. For example, if you are using Aux 3 as
mono monitor send to the bass player's floor wedge and Auxes 5 and 6 as the
stereo send to the keyboard player's in-ear monitors, the talkback signal will be
sent to both monitors—so don't say anything you wouldn't want both to hear!
The Master section of the StudioLive controls the
monitoring, talkback output, solo bus, and aux and
tape inputs.
Controls
4
Master Section 4.7
45
45