PRESONUS StudioLive24.4.2 Owner's Manual page 58

5 Scene, Presets, and the System Menu
5.3 Graphic Equalizers
58
no frequency ripple. The StudioLive EQ is also capable of very sharp notches.
To widen a notch or a bump on a particular band, just bring the adjacent
bands closer to that band's gain and the bandwidth will change accordingly.
Making drastic adjustments too quickly, may create an audio artifact as the
new curve is redrawn and crosses over an audio peak. If you are hearing audio
artifacts while setting up your Graphic EQ, try creating a smoother curve.
To begin, use the Value encoder to scroll to an empty position in the GEQ
Preset library. Press the Next button again to navigate to the first letter of the
preset name. Turn the Value Encoder clockwise or counter-clockwise to change
the letter. The StudioLive allows you to customize the name with uppercase
and lowercase letters, as well as a selection of numerals and punctuation
marks. You can insert a space by simply pressing the Tap button. Once you
are satisfied with your changes, press the Store button. It will illuminate while
the GEQ preset is being written to the StudioLive's internal memory. Once
the GEQ preset is saved, the Store button will return to its unlit state.
PreSonus StudioLive
When you press the GEQ button on your StudioLive,
the Graphic EQ menu will be displayed on your LCD
screen There are 4 dual-mono (8 channels) Graphic
EQs in your StudioLive 24.4.2. These Graphic EQs are
assignable in stereo pairs. Each GEQ can be assigned
to the Mains, Subgroups 1-4, or Aux 1-10. The bus
assignment can only made from an odd-numbered
GEQ. The even-numbered GEQ will automatically be
assigned to the other half of the stereo pair. For
example, if you assign GEQ 1 to Subgroup 1, GEQ 2 will
automatically be assigned to Subgroup 2.
Each of the eight channels of Graphic EQ can be
controlled individually or odd-even pairs can be
controlled as a stereo unit. To copy the left side (odd)
GEQ settings to the right side (even), simply page
down to the ride side and press the Recall button.
Pressing the Recall button while using an odd
numbered GEQ will flatten it.
Use the Page Up and Page Down buttons to
navigate between Graphic EQs. Use the Next and
Prev buttons to navigate through each GEQ screen
and the Value knob to change a parameter
Like all other parameters on your StudioLive, your
Graphic EQ settings can be stored and recalled.
have created a GEQ setting that you would like to save
to the GEQ Preset library, press the Save button in the
Fat Channel while that GEQ is active. You will notice
that the LCD will display the GEQ Save menu.
™ 24.4.2
If you