PRESONUS StudioLive24.4.2 Owner's Manual page 41

Owner's Manual
Output Level Control
Aux Send Select Button
Mix Button
Mix|Pan Button
Adjusts the Master Level of the Aux Output.
This knob controls the overall output level of the aux mix.
Enables Fat Channel Viewing.
As previously described in section 4.1.1, the Select button routes its aux bus
through the Fat Channel, allowing you to add dynamics processing and EQ
Enables Aux Bus Mixing in the Fat Channel.
Press the Mix button a third time to disengage Aux Mix mode.
Enables Pan Control and Metering in the Fat Channel
(Stereo Send Mode Only).
On Aux Sends 2, 4, 6, 8, and 10 the Mix button becomes the Pan control when two
auxes are linked. When this button is enabled, the 24 encoders in the Fat Channel
become the pan controls for each of their respective input channels. The meters
will display the pan setting of each of the input channels.
Press the Mix|Pan button a second time to disengage Aux Mix Pan mode.
For more information of stereo linking, please review Section 4.1.4.
When the Mix button is pressed once, the 24 encoder
knobs in the Fat Channel become the aux-send level
controls for each of their respective input channels.
The meters will display the send amount for each of
the input channels.
Pressing the Mix button a second time will switch
the first six meters and encoders to become the
aux-send level controls for the Main FireWire
Return, Analog Tape In, Aux Input A, Aux Input B,
the output of FXA and FXB, and the Talkback mic.
While in this mode, the Mix button will remain
illuminated, and LEDs at the top, middle, and
bottom of meters 7-24 will also illuminate.
Controls 4
Aux Sends 4.4
41 41