Replacing the rear window glass wiper blades
ä
First read and observe the introductory information and safety warn-
ings
on page 38.
Removing the wiper blade
›
Raise the windscreen wiper arm from the rear window and slightly tilt the
windscreen wiper blade towards the wiper arm, arrow
›
Hold the windscreen wiper arm at the top end with one hand.
›
With the other hand unlock the locking button
in the direction of arrow
.
B
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check whether the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
Rear window
Manual dimming interior mirror
Basic setting
›
Pull the lever on the bottom edge of the mirror forward.
Dimming mirror
›
Push the lever on the bottom edge of the mirror backwards.
Fig. 30
Rear window wiper blade
» Fig.
30.
A
and remove the wiper blade
1
Exterior mirror
Adjust the rear mirror before commencing to drive so that there is a clear view to
the rear.
Heating of the external mirror
›
Place the rotary knob into the position
Adjusting the left-hand exterior mirror
›
Place the rotary knob into the position
surface is identical to the movement of the rotary knob.
Adjusting the right-hand exterior mirror
›
Place the rotary knob into the position
surface is identical to the movement of the rotary knob.
Ð
WARNING
Convex (curved outward) exterior mirrors increase the field of vision. They
■
do, however, make objects appear smaller in the mirror. These mirrors are
therefore only of limited use for estimating distances to the following vehi-
cles.
Whenever possible use the interior mirror for estimating the distances to
■
the following vehicles.
Note
The exterior mirror heater only operates when the engine is running.
■
Ð
Do not touch the surface of the exterior mirrors if the exterior mirror heater is
■
switched on.
Fig. 31
Inner part of door: Rotary knob
» Fig.
31.
» Fig.
31. The movement of the mirror
» Fig.
31. The movement of the mirror
Lights and Visibility
£
41