Skoda Rapid Owner's Manual page 14

WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
■
sponsible for road safety.
Do not only rely upon the information given on the outside temperature dis-
■
play that there is no ice on the road. Even at temperatures around +4 °C, black
ice may still be on the road surface – warning, drive with care!
Note
In certain national versions the displays appear in the Imperial system of meas-
■
ures.
If the display of the second speed is activated in mph, the current speed is not
■
indicated in km/h on the display.
Memory
ä
First read and observe the introductory information and safety warn-
ings on page 11.
The multi-function display is equipped with two automatic memories. The selec-
ted memory is shown in the Display
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Button » Fig. 5 » page 12 is used to switch over the memory.
B
12
Using the system
Fig. 4
Multi-function display
» Fig. 4.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,
the memory is automatically erased.
Total-trip memory (memory 2)
The total-trip memory gathers data from any number of individual journeys up to
a total of 19 hours and 59 minutes driving or 1 999 kilometres driven, and on vehi-
cles which are fitted with an information display up to a total of 99 hours and
59 minutes driving or 9 999 kilometres driven. The memory is deleted when ei-
ther of these limits is reached and the calculation starts all over again.
Unlike the single-trip memory, the total-trip memory is not deleted after a period
Ð
of interruption of driving of 2 hours.
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
Operation
ä
First read and observe the introductory information and safety warn-
ings on page 11.
The rocker switch » Fig. 5 and the button
A
wiper lever.
Select memory
›
Press the button » Fig. 5.
B
Fig. 5
Multi-functional indicator: Con-
trol elements
are located on the windshield
B
Ð
£