ATA Command Description
5.1.5.1. Word 0: General Configuration
This field informs the host that this is a non -magnetic, hard sectored, removable storage device with a transfer rate
greater than 10 mb/sec and is not MFM encoded. CompactFlash products report 848AH in compliance with the CFA
specification.
5.1.5.2. Word 1: Default Number of Cylinders
This field contains the number of translated cylinders in the default translation mode. This value will be the same as
the number of cylinders.
5.1.5.3. Word 3: Default Number of Heads
This field contains the number of translated heads in the default translation mode.
5.1.5.4. Word 4: Number of Unformatted Bytes per Track
This field contains the number of unformatted bytes per translated track in the default translation mode.
5.1.5.5. Word 5: Number of Unformatted Bytes per Sector
This field contains the number of unformatted bytes per sector in the default translation mode.
5.1.5.6. Word 6: Default Number of Sectors per Track
This field contains the number of sectors per track in the default translation mode.
5.1.5.7. Words 7-8: Number of Sectors per Card
This field contains the number of sectors per CompactFlash Memory Card. This double word value is also the first
invalid address in LBA translation mode.
5.1.5.8. Words 10-19: Memory Card Serial Number
The contents of this field are right justified and padded with spaces (20h).
5.1.5.9. Word 20: Buffer Type
This field defines the buffer capability with the 0002h meaning a dual ported multi -sector buffer capable of
simultaneous data transfers to or from the host and the CompactFlash Memory Card.
®
5-6
CompactFlash
Memory Card Product Manual, Rev. 10.0 © 2002 SANDISK CORPORATION