General Configuration; Default Number Of Cylinders; Default Number Of Heads; Number Of Unformatted Bytes Per Track - SanDisk SDP3B Product Manual

SDP3B FlashDisk Product Manual
6.1.5.1

General Configuration

This field informs the host that this is a non-
magnetic, hard sectored, removable storage device
with a transfer rate greater than 10 mb/sec and is
not MFM encoded.
6.1.5.2

Default Number of Cylinders

This field contains the number of translated
cylinders in the default translation mode. This
value will be the same as the number of cylinders.
6.1.5.3

Default Number of Heads

This field contains the number of translated heads
in the default translation mode.
6.1.5.4 Number of Unformatted Bytes per
Track
This field contains the number of unformatted
bytes per translated
translation mode.
6.1.5.5 Number of Unformatted Bytes per
Sector
This field contains the number of unformatted
bytes per sector in the default translation mode.
6.1.5.6

Default Number of Sectors per Track

This field contains the number of sectors per track
in the default translation mode.
6.1.5.7

Number of Sectors per Card

This field contains the number of sectors per
SDP3B FlashDisk. This double word value is also
the first invalid address in LBA translation mode.
6.1.5.8

Memory Card Serial Number

The contents of this field are right justified and
padded with spaces (20h).
62
track in the default
SanDisk SDP3B FlashDisk Product Manual © 1998 SANDISK CORPORATION
6.1.5.9

Buffer Type

This field defines the buffer capability with the
0002h meaning a dual ported multi-sector buffer
capable of simultaneous data transfers to or from
the host and the SDP3B FlashDisk.
6.1.5.10

Buffer Size

This field defines the buffer capacity of 2 sectors
or 1 kilobyte of SRAM.
6.1.5.11

ECC Count

This field defines the number of ECC bytes used on
each sector in the Read and Write Long commands.
6.1.5.12

Firmware Revision

This field contains the revision of the firmware
for this product.
6.1.5.13

Model Number

This field contains the model number for this
product and is left justified and padded with
spaces (20h).
6.1.5.14

Read/Write Multiple Sector Count

This field contains the maximum number of sectors
that can be read or written per interrupt using the
Read Multiple or Write Multiple commands.
6.1.5.15

Double Word Support

This field indicates this product will not support
double word transfers.
6.1.5.16

Capabilities

This field indicates this product will not support
DMA Data transfers but does support LBA mode.