Show Bgp Neighbors - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

12-45 show bgp neighbors

Description
This command is used to display BGP and TCP connections with the BGP neighbor or routing
table entries containing a BGP neighbor. To display BGP and TCP connection information for
neighbor sessions, or routing table entries with BGP neighbor. For BGP, this includes detailed
neighbor attribute, capability, path, and prefix information. For TCP, this includes statistics related
to BGP neighbor session establishment and maintenance. If both the IPv4 unicast and IPv6
unicast are not specified, information for the IPv4 unicast will be displayed.
Format
show bgp neighbors {[<ipaddr> | <ipv6addr>] {[{[ipv4 | ipv6] unicast} [advertised_routes |
received_routes | routes | received_prefix_filter] | statistics]}}
Parameters
neighbors - Detailed information about TCP and BGP neighbor connections.
<ipaddr> - (Optional) Enter the IPv4 address used for the configuration here.
<ipv6addr> - (Optional) Enter the IPv6 address used for the configuration here.
ipv4 unicast - (Optional) Specifies to display routes for the IPv4 unicast address family.
ipv6 unicast - (Optional) Specifies to display routes for the IPv6 unicast address family.
advertised_routes - (Optional) Displays the routes advertised to a BGP neighbor.
received_routes - (Optional) Displays the routes received from this neighbor.
routes - (Optional) Displays routes in the routing table learned from the neighbor.
received_prefix_filter - (Optional) Displays the prefix filter information that is received from a
BGP neighbor.
statistics - (Optional) Displays the statistical information learned.
Restrictions
None. (EI Mode Only Command)
Example
To show the BGP neighbor or routes relative to one neighbor:
DGS-3620-28PC:admin# show bgp neighbor 10.10.10.2
Command: show bgp neighbors 10.10.10.2
BGP neighbor: 10.10.10.2 (Internal Peer)
-----------------------------------------------
Session State
Remote AS
Remote Router ID
BGP State
Hold Time
Keepalive Interval
Advertisement Interval
AS Origination Interval
Connect Retry Interval
EBGP Multihop
Weight
: Enabled
: 1111
: 3.3.3.3
: Established (UP for 00:19:12)
: 9 Seconds
: 3 Seconds
: 5 Seconds
: 15 Seconds
: 120 Seconds
: 255
: 0
212