Start Recording At A Specific Date - JVC VR-716E Instructions Manual

Record Program Using the Program Timer (Start recording at a specific date)
<Example> Execute recording from 8:00 a.m. ~ 11:00 p.m. on 1 October.
Recording Mode
• [CAMERA] 1 - 4
[REC SPEED] : 8.3
[REC QUALITY] : [H]
[AUDIO REC] : [ON]
1.
Click
2.
Set to the Program Timer Standby mode
☞ Page 88 'Setting VR-716 to the Program Timer Standby Mode'
• [CAMERA] 5 - 8
DO NOT RECORD
z z
1
2
3
4
5
• [CAMERA] 9 - 12
[REC SPEED]
[REC QUALITY] : [B]
[AUDIO REC]
Select the Program No..
• A maximum of 16 timer programs can be
Select the date to
execute record.
• Click [RESET] to restore the value previ-
Select the time to start/
end record program.
• Click [SAVE] to save settings at VR-716.
• Click [RESET] when settings are incor-
• Upon clicking [SAVE], restoration of the
Select the [REC
SPEED], [REC
QUALITY], [AUDIO
REC] and [EXEC] for
each camera channel.
Click [SAVE].
• When all the "CAMERA" settings of a par-
Program List for Date
Timer.
• Refer to the notes related to Summer Time.
• [CAMERA] 13 - 16
: 4.2 DO NOT RECORD
: [OFF]
Notes
set for a specific recording mode in the
Date Timer Setup.
ously saved.
rectly entered.
original preset value will not be possible.
Caution
ticular "BLOCK" in VR-716's "REC MODE"
Menu are set to "OFF", the "FRAME
RATE", "REC QUALITY" and "AUDIO REC"
settings for that block cannot be altered.
(☞ Page 116)
87