JVC VR-716E Instructions Manual page 13

Names and Functions (Front Display)
0 Counter/Setting Display
Press the [DISPLAY] button 8 on the front panel to switch
between the clock display, date display, remaining space
display and record setting display.
Clock Display: Example > 12:34:56, 1 March
DISPLAY
Date Display: Example > 1 March 2003 (When "DATE DISPLAY" setting in menu screen is "D/M/Y")
DISPLAY
Remaining Hard Disk Space Display: Example > 1234 hours left
DISPLAY
"REC MODE" Settings: Example > "BLOCK": "1", "AUDIO REC": "ON", "REC QUALITY": "H", "FRAME RATE": "25"
"FRAME RATE"
"REC MODE" Settings: Example > "BLOCK": "2", "AUDIO REC": "OFF", "REC QUALITY": "L", "FRAME RATE": "1/12"
Error Code Display: Example > Error01
☞ Page 105 'Problems Related to Error Code and Onscreen Display'
When in the Play mode, display of recording time on the playback screen is not
possible.
Displays the remaining time of continuous recording when in the normal re-
cording mode. Display is not shown during Repeat Recording.
"REC QUALITY" "AUDIO REC" "BLOCK NO."
Displays the recording conditions of each BLOCK when in the normal record-
ing, Timer Recording or Alarm Recording mode. When in the Stop or Timer
Standby mode, however, conditions for each BLOCK during normal recording
are displayed. In addition, recording conditions of the images currently being
played will be shown with priority when in the Play mode.
"FRAME RATE" is displayed as below corresponding to
each setting value in the "REC MODE" Menu (☞ Page 24)
➞ "25" 1.7 IPS ➞ "25/15"
25 IPS
12.5 IPS ➞ "25/2"
1 IPS
8.3 IPS ➞ "25/3" 1/2 IPS ➞ "1/2"
4.2 IPS ➞ "25/6" 1/6 IPS ➞ "1/6"
2.5 IPS ➞ "25/10" 1/12 IPS ➞ "1/12"
➞ "1"
13