Setting A Title For Each Camera Channel Screen - JVC VR-716E Instructions Manual

Connecting to a PC – Routine Uses of the Web Browser –

Setting a Title for Each Camera Channel Screen

1.
Click
2.
Set the camera title
82
z
1
Click the [Check] box.
2
Enter characters of
the camera title.
3 Click [SAVE].
Notes
• Up to 15 characters can be used when
setting the camera title.
• Clicking [SAVE] with the field left blank will
reset the camera title.
• Click [SAVE] to save the title at VR-716.
• Corrections cannot be made once [SAVE]
is clicked. To make corrections, re-enter
the title.
• Click [RESET] will restore the value on the
main unit.
• When the [Camera **] under [Input No.] is
displayed in orange, it indicates that the
"Camera **" item under the "REC MODE"
menu in the main menu is set to "OFF".
Caution
• Camera title input is disabled if [Check]
box is not clicked.
• Click [SAVE] only after all camera titles
have been updated.
• Alteration of camera titles is not possible
when VR-716 is in the Recording mode.